'57 Farmall 130 |
|
TITLE |
+ |
- |
FILE NAME |
+ |
- |
DATE |
+ |
- |
POSITION |
+ |
- |
|
|
130 Tranny59 viewsThis shows a broken oil slinger and possible worn gears?EZ
|
|
35 viewsHere's a look at the tranny case after being stripped down and cleaned.EZ
|
|
41 viewsThese are my gear sets, including the broken oiler gear.EZ
|
|
Oil slinger gear 354643-R1139 viewsEZ
|
|
Finals waiting39 viewsEZ
|
|
Brake bands old/new35 viewsEZ
|
|
Axles36 viewsThese axles now have new seals, seal surfaces built up and turned back down, new gaskets.EZ
|
|
Trans rebuilt37 viewsNew seals, gaskets, etc...EZ
|
|
Gears back in39 viewsTrans sitting at neutral, everything back in including excellent used oiler gear. Notice the peaned pin on the reverse idler. Good feeling to get it back together.EZ
|
|
130 in progress41 viewsThe finals and transmission have been back on for a while now. today I removed the Touch Control to rebuild it. EZ
|
|
28 viewsAfter removing the rockshaft the levers had to come off.EZ
|
|
30 viewsLooking pretty grimy in thereEZ
|
|
31 viewsHere she sits on the operating table.EZ
|
|
35 viewsA view of the inside of the bottom from the top. Or something like that.EZ
|
|
33 viewsThis is the orfice screen. looks to be in good shape and relatively clean.EZ
|
|
29 viewsHead off.EZ
|
|
36 viewsNice and clean now. Just have to wait until the kit comes in. I closed it all back up.EZ
|
|
36 viewsThe Oil Strainer has some junk stuck to it. Doing it's job. Looks to be in good shape.EZ
|
|
38 viewsWhat are all these? And what do I do with them?EZ
|
|
32 viewsI suspect most of the leaking was happening at these piston seals.EZ
|
|
|