Last additions - SteveC67 |
LowBoy whitewalls125 viewsNice look! The rears were on the tractor when I got it. 154 LowBoy wheels have the wrong offset. I drilled the spot welds out and reversed the centers. They fit nice now.SteveC67Nov 22, 2009
|
|
Front blade82 viewsHas home-made front rims with 13" car tires. . I've got another set of standard front rims. SteveC67Nov 22, 2009
|
|
Front blade110 viewsI bought some incomplete blades over the years and most recently used this one as a mid-mount.
I cut down a really rusted mount to fit the LowBoy and extended the lift arm 5".
Had to make a lift rod too.SteveC67Nov 22, 2009
|
|
Custom seat68 viewsThe tractor was missing the seat when I got it. I had this one. Since this will be my snow tractor, I mounted this one for the winter.SteveC67Nov 22, 2009
|
|
Trap Door64 viewsPO freehanded a door in the hood. At least it hinges straight. The grille is bent quite badly but I'll try to straighten it.SteveC67Nov 22, 2009
|
|
9N chassis61 viewsI was in a hurry to get the tactor done for a hay ride. An unplanned ring job set me behind. The finished tractor is pictured with the nut planter. It is a 20 foot paint job, but this is a "user", not a "show-er".SteveC67Nov 06, 2009
|
|
9N with 3 pt nut/seedling planter69 views3pt blade frame, plow coulter, scarifier tooth, cultivator gauge wheels and some welding rod.
The 9n could use a little slower 1st gear, but it works.SteveC67Nov 06, 2009
|
|
Nut/Seedling planter65 viewsI sort of copied a 3pt tree planter for planting walnuts this fall. I should also be able to plant seedlings too by taking off the seed tube and putting in a taller shoe extension. The space for the shoe is a little shorter than most seedling planters, but it should work for my purposes.SteveC67Nov 06, 2009
|
|
Well Weathered LowBoy204 viewsIn addition to the ornamental branch growing through the grille, they cut a 4" mulberry tree growing between the mower and front axle. This one will be fun to save!SteveC67Nov 05, 2009
|
|
Still Ugly LowBoy112 viewsI bought this for a useable hood and parts. Bonus - has rear weights, a good bolster, and the engine turns over. SteveC67Nov 05, 2009
|
|
Ugly LowBoy108 viewsI was told this sat in the same spot since 1991. It looks like it!SteveC67Nov 05, 2009
|
|
Ready for the hayride188 viewsSteveC67Aug 24, 2009
|
|
Hayride 2009118 viewsSteveC67Aug 24, 2009
|
|
72 Cub with 54A blade224 viewsPushed wet and heavy 6"-8" snowfall with drifts last week of Dec. 2008. FUN!!SteveC67Jan 07, 2009
|
|
My #1 work Cub135 viewsSteveC67Dec 06, 2008
|
|
UGLY project115 viewsSteveC67Dec 06, 2008
|
|
Rescued from an orchard121 viewsKub KlipperSteveC67Dec 06, 2008
|
|
Grading Blade114 viewsSteveC67Dec 06, 2008
|
|
I guess the PO liked Fords128 viewsUseable projectSteveC67Dec 06, 2008
|
|
Cub with 54A blade676 viewsChains, weights, blade, temporary front tiresSteveC67Dec 09, 2005
|
|
22 files on 2 page(s) |
|
1 | |
|