| Last additions - User galleries |

Modified 4411 sealed beam35 viewsThe 4411/4511 sealed beam lamps come with an alignment key that interferes with the pancake light housing. This key needs to be partially removed to allow an easy fit in the housing. Use a belt sander to slowly, carefully grind the key down. When the glass starts to glow orange, stop and allow it to cool.Matt KirschDec 19, 2006
|
|

4411 lamp and reproduction gasket36 viewsThese are the parts needed to update the old pancake light housings with modern 4411/4511 style sealed beams: One 4411 selaed beam, and a reproduction gasket.Matt KirschDec 19, 2006
|
|

Trimmed gasket37 viewsNotice the "rib" on the edge of the gasket. Originally this gasket had ribs along both sides. To use 4411/4511 type sealed beams in a pancake housing, it is necessary to trim the one rib off the gasket.Matt KirschDec 19, 2006
|
|

H Towing the JD44 viewsEvery dog has it's day. This time the JD broke down and it was the H that came to the rescue. Odd that this happened on the day John's "Cub Owner" hat came in the mail. Farmall Red got even today!!!VinceDDec 18, 2006
|
|
|
|
|

Cylinder Extended51 viewsawanderDec 17, 2006
|
|

cylinder retracted55 viewsawanderDec 17, 2006
|
|

Detail of the rear cylinder mount50 viewsawanderDec 17, 2006
|
|

The front cylinder mount53 viewsNote that I used a 1/2" bolt with a 1" collar around it, threaded into the mounting plate, with a nut beneath. this has a washer on top of the collar, to hold the "clevis" lower leg in place.awanderDec 17, 2006
|
|
|
|

Grille before96 viewsCecilDec 13, 2006
|
|

Dash wiring before98 viewsCecilDec 13, 2006
|
|

Steering worm gear (yuck)94 viewsCecilDec 13, 2006
|
|

Tear down started100 viewsCecilDec 13, 2006
|
|

Grille before tank95 viewsCecilDec 13, 2006
|
|

Grille before tank92 viewsCecilDec 13, 2006
|
|

Front view before100 viewsCecilDec 13, 2006
|
|

Left front before91 viewsCecilDec 13, 2006
|
|
| 14447 files on 723 page(s) |
 |
 |
 |
 |
 |
 |
 |
656 |  |
 |
 |
 |
 |
|