| Last additions |
|
|
Sickle Bar Mounting Hardware49 viewsdon mccombsOct 03, 2014
|
|
|
|
20 viewsWent to an auction a couple years ago and bought 3 or 4 Farmall steering wheels; two were Cub size, two were bigger. Almost threw the larger ones away on several occasions, but now I'm glad I didn't. The steering wheel that came on my H had a bad spot, so will use the spare to repair it.StantonOct 03, 2014
|
|
20 viewsFarmall H steering wheel on upper left; spare on right. It only had one bad spot.StantonOct 03, 2014
|
|
20 viewsFarmall H steering wheel on left with bad portion removed. Spare wheel on right with handles cut and being popped off with screw drivers.StantonOct 03, 2014
|
|
10 viewsPieces ready to be applied with JB Weld.StantonOct 03, 2014
|
|
10 viewsJB Weld applied. Lots of sanding.StantonOct 03, 2014
|
|
10 viewsJB Weld sanded down smooth. Ready for primer and paint.StantonOct 03, 2014
|
|
10 viewsPrimed and painted the black portion.StantonOct 03, 2014
|
|
11 viewsTaped off the black and shot some red. Turned out really nice.StantonOct 03, 2014
|
|
9 viewsMissing a J hook and spring. Formed one from 1/4" cold rolled steel rod.StantonSep 30, 2014
|
|
9 viewsFinished J hook with spring. Found the spring at Feldman's, a farm and home store.StantonSep 30, 2014
|
|
9 viewsInstalled J hook.StantonSep 30, 2014
|
|
10 viewsHood was in dire need of stripping. It was 2013 Thanksgiving weekend and the weather was cooperative.StantonSep 29, 2014
|
|
|
|
10 viewsStripped nose and hood.StantonSep 29, 2014
|
|
9 viewsRented a 2" tap to redress the manifold threads. The existing exhaust pipe had stripped threads and just sat down in the manifold. All those years of wobbling around in there rounded off the manifold threads and/or filled them with black soot. First, I tried using a 2" pipe nipple, but it wouldn't grab and center itself to cut; just kept popping out even with pressure and tapping with a mallet. So, I called the rental shop and rented a 2" pipe tap. Was tough to turn at the end. But do-able.StantonSep 29, 2014
|
|
9 viewsThreads restored. Rental cost was $15 for 3 hours. Couldn't buy a good used manifold for that.StantonSep 29, 2014
|
|
| 27665 files on 1384 page(s) |
 |
|
|
|
|
|
|
67 | |
|
|
|
|
|
