Notice: Undefined offset: 8192 in /home/cubfest/public_html/photos/include/debugger.inc.php on line 112

Notice: Undefined offset: 8192 in /home/cubfest/public_html/photos/include/debugger.inc.php on line 112
FarmallCub | Cubfest Photo Gallery - Last additions

 FarmallCub | Cubfest Photo Gallery

Photo host for users of the FarmallCub.com forum
Last additions
completeassembly.jpg
Assembled pancake light32 viewsThis is the final product. Fitting the clamp is a little tight, but manageable. The bulb is securely held in place. Who said you couldn't make a 4411 bulb look good in a pancake housing?Matt KirschDec 19, 2006
groundoffnub.jpg
Modified 4411 sealed beam35 viewsThe 4411/4511 sealed beam lamps come with an alignment key that interferes with the pancake light housing. This key needs to be partially removed to allow an easy fit in the housing. Use a belt sander to slowly, carefully grind the key down. When the glass starts to glow orange, stop and allow it to cool.Matt KirschDec 19, 2006
lampandgasket.jpg
4411 lamp and reproduction gasket36 viewsThese are the parts needed to update the old pancake light housings with modern 4411/4511 style sealed beams: One 4411 selaed beam, and a reproduction gasket.Matt KirschDec 19, 2006
trimmedgasket.jpg
Trimmed gasket37 viewsNotice the "rib" on the edge of the gasket. Originally this gasket had ribs along both sides. To use 4411/4511 type sealed beams in a pancake housing, it is necessary to trim the one rib off the gasket.Matt KirschDec 19, 2006
H_and_JD.jpg
H Towing the JD44 viewsEvery dog has it's day. This time the JD broke down and it was the H that came to the rescue. Odd that this happened on the day John's "Cub Owner" hat came in the mail. Farmall Red got even today!!!VinceDDec 18, 2006
Person_Family_Dec_2006.jpg
Merry Christmas from the Person's302 viewsPeter PersonDec 18, 2006
DSC00002~22.jpg
140 viewsbillyandmillieDec 17, 2006
DSC00001~37.jpg
139 viewsbillyandmillieDec 17, 2006
extended.jpg
Cylinder Extended51 viewsawanderDec 17, 2006
Retracted.jpg
cylinder retracted55 viewsawanderDec 17, 2006
Rear_mount.jpg
Detail of the rear cylinder mount50 viewsawanderDec 17, 2006
Front_mount.jpg
The front cylinder mount53 viewsNote that I used a 1/2" bolt with a 1" collar around it, threaded into the mounting plate, with a nut beneath. this has a washer on top of the collar, to hold the "clevis" lower leg in place.awanderDec 17, 2006
DSC02931.JPG
32 viewssilverta16Dec 16, 2006
54cub.jpg
40 viewstoolman007Dec 14, 2006
P1010002.JPG
Grille before96 viewsCecilDec 13, 2006
P1010014~0.JPG
Dash wiring before98 viewsCecilDec 13, 2006
P1010015.JPG
Steering worm gear (yuck)94 viewsCecilDec 13, 2006
P1010018.JPG
Tear down started100 viewsCecilDec 13, 2006
P1010003.JPG
Grille before tank95 viewsCecilDec 13, 2006
P1010004.JPG
Grille before tank92 viewsCecilDec 13, 2006
27665 files on 1384 page(s) 1256