Last additions - brian c '57 |
Getting close37 viewsFreshly painted wheels. New front tires. Lots of cleaned/re-painted parts re-installed.brian cJan 16, 2006
|
|
Me33 viewsFirst time back on since tear down. Getting closer.brian cJan 16, 2006
|
|
Problem closeup40 viewsThreads for implement attach were busted out. I just replaced the whole torque tube with a used one from JP. Part was about $50. Shipping was twice that.brian cDec 19, 2005
|
|
painted body 234 viewsAfter cleaning, Epoxy primer, and Dupont Nason paintbrian cDec 19, 2005
|
|
painted body 137 viewsMain body after cleaning, epoxy primer, and Dupont Nason paint.brian cDec 19, 2005
|
|
Clean tranny41 viewsTranny after cleaning with kerosene and toothbrush.brian cDec 19, 2005
|
|
clean rear end44 viewsDifferential after cleaning with kerosene and a toothbrush. Found the original set screw for the PTO shifter in the drained out fluid.brian cDec 19, 2005
|
|
new rear seal36 viewsreplaced oil pump gasket and rear crank seal.brian cDec 19, 2005
|
|
axle tube62 viewsNice rat's nest in axle tube where rear end seal was leaking.brian cDec 19, 2005
|
|
split49 viewssplit in two for general inspection, replacing seals, and replacing torque tube with busted out implement attachment threads.brian cDec 19, 2005
|
|
greasy tranny57 viewsTranny and differential had leaky seals and were filled with grease.brian cDec 19, 2005
|
|
battery76 viewsbattery prior to removal. Appears to be 12V and Negative grounded.brian cOct 23, 2005
|
|
electrical98 viewsThe voltage regulator clearly shows 6V. Tractor had 12V battery and negative ground. What gives?brian cOct 23, 2005
|
|
seat and batt box gone55 viewsFinally got the seriously corroded seat mount and battery box off.brian cOct 22, 2005
|
|
head56 viewsI started cleaning the head up after pulling it today. Good shape.brian cOct 22, 2005
|
|
Into the block60 viewsPulled the head today. Everything looks in pretty good shape.brian cOct 22, 2005
|
|
having fun74 viewsMe cleaning up after head removalbrian cOct 22, 2005
|
|
cleaning78 viewsAfter first day of pressure washingbrian cOct 22, 2005
|
|
battery corrosion66 viewsSome serious corrosion. The seat bracket was a beast to remove.brian cOct 22, 2005
|
|
seat removed53 viewsFinally got this rusted up thing off.brian cOct 22, 2005
|
|
|