'57 Farmall 130 |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
| POSITION |
+ |
- |
|
|
Steering assembly39 viewsNice to see it finally off.EZ
|
|
Steering Arm36 viewsIt took about 5 days, and all these tools, alot of patience, and no cuss words. Well maybe 1 or 2. EZ
|
|
Shaft and Key40 viewsFinally off! Also had to work that key with a punch. It had to come out for the assembly to come out as the key would not clear the bottom seal.
The steering rod bearing is still stuck in there though.EZ
|
|
Sloppy Steering45 viewsWell I found the source of the sloppy steering.
Glad I opened up that box.EZ
|
|
2150 Red39 viewsFinally got to the point that painting could be done. Really like the HVLP system.
Did this in a makeshift paintbooth, woked real nice. EZ
|
|
Epoxy Primer34 viewsFirst time using the HVLP system gun and I may have put too much epoxy primer on.
That gun sure layed it down nice though.EZ
|
|
Etch primer36 viewsThe etch primer came out of rattle cans, really sticks good to clean metal.EZ
|
|
Back on her feet.39 viewsGradually progressing. Put her back on her feet today.
Painted the rims a nice metallic silver, but not too shiny. EZ
|
|
TC Pump72 viewsEZ
|
|
Die Grind46 viewsUsed the die grinder to remove a small area so pump 383013R94 would fit.EZ
|
|
Before grind40 viewsThis area had to be ground a bit to fit the pump in.EZ
|
|
Underbelly17 viewsStarted back into the F130 after a couple years of life events. EZ
|
|
Original and Spare Carbs16 viewsRequire kit to build one one out of 2.
Use original top and spare bottom.EZ
|
|
Alternator Bracket17 viewsMoved left alt bracket toward front of tractor for better alignment.EZ
|
|
Battery box mod20 viewsFashioned up some angle c/w tabs to hold battery.
Battery boxes are at a premium right now.EZ
|
|
Battery box mod18 viewsWood platform for battery to set on.EZ
|
|
Alternator Bracket18 viewsNow able to get proper alignment of pulleys. EZ
|
|
Alternator Bracket20 viewsLeft original generator bracket intact. In case someone else many years from now decides to revert back. 1 small weld would have to be cut off to remove the conversion bracket.EZ
|
|
Battery box mod22 viewsLooks and feels solid.EZ
|
|
Zenith Carb15 viewsCleaned and re-installed with temp line from temp gas tank.EZ
|
|
|
|
