FarmallCub | Cubfest Photo Gallery

Photo host for users of the FarmallCub.com forum
Home > User galleries > Rick Prentice > Engine Ear Support

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
IMG_0315.JPG
lt side support69 viewsRick Prentice
IMG_0314.JPG
lt side support67 viewsRick Prentice
IMG_0338.JPG
ELMER 2 homemade bender61 viewsRick Prentice
IMG_0329.JPG
guide rod for bending69 viewsRick Prentice
IMG_0328.JPG
pattern sheets for rt and lt rods62 viewsRick Prentice
IMG_0327.JPG
drilling the holes53 viewsRick Prentice
IMG_0326.JPG
center drilling first56 viewsRick Prentice
IMG_0325.JPG
beginning setup center drilling, drilling, and tapping47 viewsRick Prentice
IMG_0324.JPG
tapping the holes for the 5/8-11 grade 8 all thread46 viewsRick Prentice
IMG_0323.JPG
sanding the edges43 viewsRick Prentice
IMG_0322.JPG
stop setup for batch cuts 43 viewsRick Prentice
IMG_0321.JPG
first trip to the steelyard44 viewsRick Prentice
IMG_0337.JPG
getting the initial bends close before tweeking45 viewsRick Prentice
IMG_0336.JPG
close enough for now, tweeking right before the final weld46 viewsRick Prentice
IMG_0334.JPG
first bends45 viewsRick Prentice
IMG_0333.JPG
setting up for the first bend54 viewsRick Prentice
IMG_0332.JPG
the 7/8 rod takes 750+ psi to start the bending process58 viewsRick Prentice
IMG_0331.JPG
all thread lock-tited into the main rod47 viewsRick Prentice
IMG_0345.JPG
almost finished32 viewsRick Prentice
IMG_0344.JPG
right ear welded while bolted in place37 viewsRick Prentice
55 files on 3 page(s) 2